Heat Pumps
200 Liter Mono Block
All In One Monoblock Design
Overview :
A 200 Liter mono block is a type of plastic water storage tank that has a capacity of 200 Liters. These tanks are commonly used for storing water in residential and commercial settings. They are made from high-density polyethylene (HDPE) material, which makes them durable, lightweight, and resistant to corrosion and UV rays. Mono blocks are designed with a single piece construction, eliminating the need for joints or seams, which can be potential weak points. These tanks are available in various colors and can be installed above or below ground, depending on the specific requirements of the user.
Specifications:
| 200 Liter Mono Block | Unit | HSHPM300 |
|---|---|---|
| Nominal Capacity | 200 Liter | |
| Outer diameter | 512mm | |
| Weight (when empty) | KG | 114 kg |
| Weight (filled) | KG | 314 kg |
| Height | mm | 1955 mm |
| Cylinder material | Enamelled Steel | |
| Operating Air Temperature Range(HP Model) | -5 to 43 c | |
| Maximum pressure | bar | 8 |
| Rated Input – HP mode | kw | 0.42kw |
| Heating Output – HP mode | kw | 1.6 kw |
| Electrical back up | kw | 2.5kw |
| Rated Input – HP + back up | kw | 3.2 kw |
| Heating Output HP+ back up | kw | 4.1 kw |
| Voltage and Frequency | –230V / 50Hz | |
| Running Current | Amps | 16 |
| IP Rating | IPX4 | |
| Refrigerant type | R 134A | |
| Sound power level | 48dB |
Downloads:
| File Name | Download File | Share File |
|---|---|---|
| 200 Liter Mono Block | Download |
